User Manual

Page 40
3.7.2 Return to Meters
Hilo will revert to the Meters screen after some period of inactivity. The default period is 15 seconds. This is where
you can ch an ge that delay time.
• Shows the current Menu Delay
• This sets the time that any menu, selection page, pop up
menu or status page will stay active before the screen
defaults back to the selected Meter page. The only menu page
that does not “time out” is the Output Mix Routing Page.
• Pushing the button engages a horizontal fader that lets you
set the delay to 15 seconds, 30 seconds, 1 minute, 2 minutes,
5 minutes, or Never.
• You m a y use your finger on the fader to set the delay time
• You m a y also use the Rotary Control to set the delay time
3.7.3 Meter Type
• Shows the current meter type that has been selected
• When touched, the pop up screen allows the quick change to
a different meter type on the main screen
• This is a redundant method of changing the meter type. You
can also engage this same Pop up screen by simply touch the
meter itself when the Meter page is active.