User Manual

58
13 Certifications
13.1 FCC DECLARATION OF CONFORMITY
MANUFACTURERS NAME: Lynx Studio Technology, Inc.
MANUFACTURER ADDRESS: 190 McCormick Avenue
Costa Mesa, CA 92626, U.S.A.
TELEPHONE [phone]
TYPE OF EQUIPMENT: Professional A/D and D/A Converter
MODEL NUMBER: Aurora
(n)
COMPLIANCE TEST REPORT NUMBER: Covered by CE Report # D80420Q3
COMPLIANCE TEST REPORT DATE: April 20, 2018
YEAR OF MANUFACTURE: 2018
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
13.2 CE EMI / EMC DECLARATION OF CONFORMITY
MANUFACTURERS NAME: Lynx Studio Technology, Inc.
MANUFACTURER ADDRESS: 190 McCormick Avenue
Costa Mesa, CA 92626, U.S.A.
TELEPHONE [phone]
TYPE OF EQUIPMENT: Professional A/D and D/A Converter
MODEL NUMBER: Aurora
(n)
COMPLIANCE TEST REPORT NUMBER: D80420Q3
COMPLIANCE TEST REPORT DATE: April 20, 2018
CONFORMS TO THESE STANDARDS: EN55032, EN55035
YEAR OF MANUFACTURE: 2018
13.3 CE SAFETY DECLARATION OF CONFORMITY
MANUFACTURERS NAME: Lynx Studio Technology, Inc.
MANUFACTURER ADDRESS: 190 McCormick Avenue
Costa Mesa, CA 92626, U.S.A.
TELEPHONE [phone]
TYPE OF EQUIPMENT: Professional A/D and D/A Converter
MODEL NUMBER: Aurora
(n)
COMPLIANCE TEST REPORT NUMBER: D80430S1
COMPLIANCE TEST REPORT DATE: April 9, 2018
CONFORMS TO THESE STANDARDS: EN 62368-1: 2014
YEAR OF MANUFACTURE: 2018