User Manual
Table Of Contents
- 1 Introduction
- 2 Getting Started Aurora(n)-USB
- 3 Getting Started Aurora(n)–TB3 (Thunderbolt)
- 4 Getting Started Aurora(n)-DNT (Dante)
- 5 Getting Started Aurora(n)-HD2 (ProTools HD)
- 6 Front Panel Controls
- 6.1 Meter Page
- 6.2 Function menu
- 6.2.1 Clock Setup
- 6.2.2 Line Trim
- 6.2.3 Preamp
- 6.2.4 Preamp Setup
- 6.2.5 Routing
- 6.2.6 Test Tone
- 6.2.7 Digital In Status
- 6.2.8 Optical Settings
- 6.2.9 SD Card
- 6.2.10 SD Record Setup
- 6.2.11 Sessions
- 6.2.12 Takes
- 6.2.13 Scenes
- 6.2.14 Playlists
- 6.2.15 Settings
- 6.2.16 Date & Time
- 6.2.17 Backlight
- 6.2.18 About
- 6.2.19 Firmware Update
- 6.2.20 USB Mode
- 6.3 Phones Source (Basic)
- 6.4 Phones Source (Advanced)
- 7 microSD Record and Play basics
- 8 Firmware Updates
- 9 Support
- 10 Troubleshooting & User Tips
- 11 Specifications
- 12 Aurora(n) Performance Measurements
- 13 Certifications
- 14 Warranty Information
53
12.4 A/D Frequency Response at 48 kHz and 96 kHz Sample Rates
Sample Rate: 48 kHz / 96kHz Signal Level: -1dBFS Trim: +4 dBu Channel: 1
Analyzer BW: <10Hz – Fs/2 Output impedance: 40 ohms
Lynx Studio Technology
10/11/17 15:10:42
A-D FREQUENCY RESPONSE 48kHz and 96
kHz Sample Rate
A-D FREQ RESP.at27
ColorSweep
Trace Line Style Thick
Data
Axis Comment
1 1 Red Solid 3 DSP Anlr.Level A!Normalize Left 48 kHz
2 1 Blue Solid 3 DSP Anlr.Level A!Normalize Left 96 kHz
19 dBu, 96kHz
10 50k 20 50 100 200
500 1k 2k 5k 10k 20k
Hz
-3
+1
-2.75
-2.5
-2.25
-2
-1.75
-1.5
-1.25
-1
-0.75
-0.5
-0.25
-0
+0.25
+0.5
+0.75
d
B
r
1