User Manual
Table Of Contents
- 1 Introduction
- 2 Getting Started Aurora(n)-USB
- 3 Getting Started Aurora(n)–TB3 (Thunderbolt)
- 4 Getting Started Aurora(n)-DNT (Dante)
- 5 Getting Started Aurora(n)-HD2 (ProTools HD)
- 6 Front Panel Controls
- 6.1 Meter Page
- 6.2 Function menu
- 6.2.1 Clock Setup
- 6.2.2 Line Trim
- 6.2.3 Preamp
- 6.2.4 Preamp Setup
- 6.2.5 Routing
- 6.2.6 Test Tone
- 6.2.7 Digital In Status
- 6.2.8 Optical Settings
- 6.2.9 SD Card
- 6.2.10 SD Record Setup
- 6.2.11 Sessions
- 6.2.12 Takes
- 6.2.13 Scenes
- 6.2.14 Playlists
- 6.2.15 Settings
- 6.2.16 Date & Time
- 6.2.17 Backlight
- 6.2.18 About
- 6.2.19 Firmware Update
- 6.2.20 USB Mode
- 6.3 Phones Source (Basic)
- 6.4 Phones Source (Advanced)
- 7 microSD Record and Play basics
- 8 Firmware Updates
- 9 Support
- 10 Troubleshooting & User Tips
- 11 Specifications
- 12 Aurora(n) Performance Measurements
- 13 Certifications
- 14 Warranty Information
51
12 Aurora
(n)
Performance Measurements
Test Setup:
• Aurora
(n)
with two AIO8E modules and LM-DIG
• Analyzer: Audio Precision SYS-2722, S/N SYS2-32376
12.1 A/D THD+N Ratio vs Frequency
Sample Rate: 44.1 kHz Signal Level: -1dBFS Trim: +4 dBu Channels: 1/2
Analyzer BW 22Hz – 20kHz Filter: None Output impedance: 40 ohms
Lynx Studio Technology
10/11/17 14:34:59
AIDO THD+N RATIO VS FREQUENCY
A-D THD+N VS FREQ SINGLE CHANNEL +4.at2c
ColorSweep Trace Line Style Thick Data
Axis Comment
1 1
Blue Solid 3 DSP Anlr.THD+N Ratio A Left
1 3
Red
Solid 3 DSP Anlr.THD+N Ratio B Left
-120
-30
-115
-110
-105
-100
-95
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
-35
d
B
20 20k 50 100 200 500 1k 2k 5k 10k
Hz
0.0001
5
0.0002
0.0005
0.001
0.002
0.005
0.01
0.02
0.05
0.1
0.2
0.5
1
2
%