User Manual

50
Digital I/O on LM-DIG Module
Number
Eight inputs and eight outputs
Type
24-bit AES/EBU format, transformer coupled
Channels
16 inputs / outputs
Optical I/O on DB-ADAT Module
Number
Two inputs and two outputs
Type
24-bit ADAT or SPDIF format, TOSLINK connectors
Channels
16 inputs / outputs for ADAT mode
4 inputs / outputs for SPDIF mode
General
Processing
32-bit RISC processor in field programmable FPGA
Sample Rates
All standard rates up to 192 kHz using SynchroLock II sample
clock generator
Synchronization Options
Internal clock, external word clock, or AES/EBU (with LM-DIG
module)
Word Clock I/O
1 input and 3 outputs (without LM-PRE4 installed)
1 input and 1 output (with LM-PRE4 installed)
BNC connectors
75 ohm input impedance, 2.0–3.3VPP measured at input required
75 ohm output impedance, 4.5VPP open circuit typically
LSlot™ Expansion Port
Supports Lynx LSlot expansion cards with up to 32 input and
outputs simultaneously
LCD Display
480 X 128 TFT LCD
AC Power
100 to 240 VAC, 70 watts maximum
Size
19” wide; 1.7” tall; 10.00” deep
483mm wide; 44.5mm tall; 254mm deep
Shipping Weight
Depending on I/O configuration
7-7.3 pounds
3.6–3.9kg