User Manual

40
• When in channel mode:
Rotate rotary encoder to change between:
Stereo (normal: left goes to left, right goes to right)
Sum (left and right summed together and has 6dB gain reduction)
Left (left & right headphone channels listen to the left source channel)
Right (left & right headphone channels listen to the right source channel)
Press the Up or Down arrow buttons to change between source channels, even when in 'volume' or 'channel
mode' to allow for quick change of volume between multiple sources.
6.4 Phones Source (Advanced)
Please see the “Settings” page above to select between the Basic and Advanced Phone Source page.
The “Phones Source” page can be brought up from any other page on the Aurora
(n)
display by simply pressing
the Phones Source button. This is where the source can be selected for the two headphone outputs. Please
note: The PHONES have independent level controls, but the source selected will apply to both jacks.
The “Phones Source” Advanced page allows for precise routing from any source channel to the phones.
Pressing the Function button switches between the three main “groups” on the Phones Source page: Phones
Input Source / Input Control / Output. The Function button has a blue background to correspond to the blue
outline around each of the three main groups. When the Phones Source page is first displayed, the Output
group is currently selected and the Output volume is the currently selected control.
Pressing the Select button switches between the individual controls in the currently selected group. The
Select button has a white background to correspond to the white outline around the selected control.