User Manual

39
6.3 Phones Source (Basic)
Please see the “Settings” page above to select between the Basic and Advanced Phone Source page.
The “Phones Source” page can be brought up from any other page on the Aurora
(n)
display by simply pressing
the Phones Source button. This is where the source can be selected for the two headphone outputs. Please
note: The PHONES have independent level controls, but the source selected will apply to both jacks.
Mixing and individual input volume control are possible for the phones source. Press the Function button to
switch between Input Groups (Line In/Digital In/LSlot Play/SD Card Play). Please note the actual input
groups shown on the Aurora
(n)
depend on the configuration of the modules and if the SD card is inserted and
has playable tracks. The SD Card option will always have 32-channels available for selection, even though
the currently selected track may have fewer channels.
Press the Select button to switch between source channels, volume and channel mode. The rotary encoder role
changes for each of these modes:
• When selecting source channels:
Rotate rotary encoder to switch between channels.
Press rotary encoder to switch between muted state and last attenuation.
• When in volume mode:
Rotate rotary encoder to change individual input volume (the selected input will have a green outline).
Press rotary encoder to switch between muted state and last attenuation.