User Manual

10
connect to the Aurora as a
Thunderbolt Device
reinstall, you will not see this
dialog box. Just continue on
with the subsequent steps).
5. Double-click the installation
file to start the driver
installation
6. Accept the License Agreement
by clicking “Accept”
7. The installer will extract the
necessary files to the C:\Lynx
directory. Click “Extract” from
this window
8. If you are prompted to let the
program make changes to the
computer, select “Yes”. You
will next see the driver Install
dialog. Click “Install”
9. You may get a Windows
Security Dialog Bog. If so,
select “Install”. Driver
installation will proceed
10. Finally you will receive a
confirmation that the install
completed successfully.
11. The Aurora
(n)
-TB3 is ready to
use, no reboot necessary.
NOTE: The driver installation process installs both the Windows driver and the NControl application.
NControl is installed into the Lynx Studio Technology program group.
3.3.1.1 Verification of successful Installation in Windows
After driver installation, let’s test playback and make sure we get indication of proper performance before
claiming victory.
First, we will set up the Aurora as the default audio device in Windows. To do so, Navigate to the Sound
Section of Windows Control Panel. Set the Aurora
(n)
Speakers as the default device.
Next, we open NControl from Start > Programs > Lynx Studio Technology > NControl.
Next, we will test playback using Windows Media Player. Open a known good file and hit play. Navigate to
NControl and look at the output meters in the bottom row. Do we see meter activity?
If not, double check cable connections, refer to the online support resources from the lynxstudio.com website,
or contact Lynx Technical support.