Micro Servo Saver Arm Set

Table Of Contents

We suggest cutting out part

of frame to make room for

arm servo moves

Make two side.

DR1231

Micro Servo Spring Bushing

DR1236

Micro Servo Arm

Gear Saver

Step 1

DR1232

Servo Washer 1.6X4.5X0.5

PAN1.6X3

M1.6x3 Pan Head Screw

Step 2

Factory Assembly

Use this hole when

used in T-Rex 150

Trim the servo arm here

when used in T-Rex 150

Use these holes for other

helicopter applications.

Always use per reference user

manual of your helicopter.

Note: T-rex 150 linkage ball and

servo arm set up

NOTE: During assembly this screw must

lock loose, otherwise the servo arm

cannot rotate in case of crash.

We suggest locking the screw completely,

and then open half of turn.

This operation is mandatory for the

perfect function of the system.

LYNX MANUAL DOC .REV .A 18-03-2014

LX1097 MICRO SERVO SAVER ARM - SET 3 PC

HELI INNOVATIONS

Assembly finish

PAGE 1
LYNX MANUAL DOC .REV .A 18-03-2014 Assembly finish LX1097 MICRO SERVO SAVER ARM - SET 3 PC Step 1 Factory Assembly Step 2 DR1236 Micro Servo Arm Gear Saver DR1231 Micro Servo Spring Bushing DR1232 Servo Washer 1.6X4.5X0.5 PAN1.6X3 M1.6x3 Pan Head Screw NOTE: During assembly this screw must lock loose, otherwise the servo arm cannot rotate in case of crash. We suggest locking the screw completely, and then open half of turn. This operation is mandatory for the perfect function of the system.