Use Instructions
Table Of Contents
- 1 About this document
- 2 Product Overview
- 3 Interface Description
- 3.1 PIN Definition
- 3.2 Operating condition
- 3.3 Digital I/O characteristics
- 3.4 Power Interface
- 3.5 UIM interface
- 3.6 PCM interface(TBD)
- 3.7 USB2.0 interface
- 3.8 UART Interface
- 3.9 Power on/off and reset interface
- 3.10 Interactive interface
- 3.11 Net Light interface
- 3.12 System boot configuration and download
- 3.13 Analog and Digital conversion (ADC) interface
- 3.14 I2C interface
- 3.15 SPI interface
- 3.16 Antenna interface
- 4 Product characteristics
- 5 Design guideline
- 6 Manufacturers
- 7 Package Storage information
- 8 Safety Information
L710HG Hardware Design
47
Figure 5-1 RECOMMENDED LAND PATTERN (Unit: mm)
5.6 Products recommended upgrade
L710HG default through the USB firmware updates, so products to facilitate the software update,
when the design proposal to set aside the USB test points or interface to facilitate subsequent product
of the firmware upgrade.