Use Instructions
Table Of Contents
- 1 About this document
- 2 Product Overview
- 3 Interface Description
- 3.1 PIN Definition
- 3.2 Operating condition
- 3.3 Digital I/O characteristics
- 3.4 Power Interface
- 3.5 UIM interface
- 3.6 PCM interface(TBD)
- 3.7 USB2.0 interface
- 3.8 UART Interface
- 3.9 Power on/off and reset interface
- 3.10 Interactive interface
- 3.11 Net Light interface
- 3.12 System boot configuration and download
- 3.13 Analog and Digital conversion (ADC) interface
- 3.14 I2C interface
- 3.15 SPI interface
- 3.16 Antenna interface
- 4 Product characteristics
- 5 Design guideline
- 6 Manufacturers
- 7 Package Storage information
- 8 Safety Information
L710HG Hardware Design
44
4.4 ESD performance
L710HG is electrostatic sensitive device, therefore, the user in the production, assembly and
operation of the module must pay attention to the electrostatic protection. L710HG ESD performance
parameters in the following table:
Table 4-6 ESD performance parameters (temperature 25 ℃, humidity: 45%)
Net
contact air
VBAT GND ±5KV ±10KV
Antenna port ±4KV ±8KV
UART ±2KV ±4KV
USB ±3KV ±6KV
Other PADS ±2KV ±4KV