Use Instructions
Table Of Contents
- 1 About this document
- 2 Product Overview
- 3 Interface Description
- 3.1 PIN Definition
- 3.2 Operating condition
- 3.3 Digital I/O characteristics
- 3.4 Power Interface
- 3.5 UIM interface
- 3.6 PCM interface(TBD)
- 3.7 USB2.0 interface
- 3.8 UART Interface
- 3.9 Power on/off and reset interface
- 3.10 Interactive interface
- 3.11 Net Light interface
- 3.12 System boot configuration and download
- 3.13 Analog and Digital conversion (ADC) interface
- 3.14 I2C interface
- 3.15 SPI interface
- 3.16 Antenna interface
- 4 Product characteristics
- 5 Design guideline
- 6 Manufacturers
- 7 Package Storage information
- 8 Safety Information
L710HG Hardware Design
9
TOP
VIEW BOTTOM VIEW SIDE VIEW
Figure 2-1 Product Physical Map
2.1 Package Dimensions
The product module is 64-PIN LCC package module. The size of L710HG is extremely small, it is
only 21.5.0 x 25.0 x 2.4 mm with LCC package, It is cost competitive and high integrated which make
it convenient for customer to design their own application products. Pin 1 position from the bottom of
the belt angle welding plate to identify, the missing corner where the direction of the corresponding
module angle pad, figure 2-2 is the product dimension type map:
(a)Top Dimensions (Unit mm) (b)Side View (Unit mm)A