Installation Instructions
Table Of Contents
- Contents
- List of Table
- List of Figures
- 1 About this document
- 2 Product Overview
- 3 Mechanical Dimensions
- 4 Interface description
- 4.1 Pin Definition
- 4.2 Operating conditions
- 4.3 Digital logic characteristics
- 4.4 Power interface
- 4.5 USIM card interface
- 4.6 PCM interface
- 4.7 USB2.0 interface
- 4.8 UART interface
- 4.9 SPI interface
- 4.10 I2C interface
- 4.11 Network light
- 4.12 System Status Indication
- 4.13 Flight Mode
- 4.14 Forced USB download interface
- 4.15 SD card interface
- 4.16 SDIO_WIFI/EMMC interface
- 4.17 PCIe interface
- 4.18 RMII/RGMII interface
- 4.19 AUDIO interface
- 4.20 ADC
- 4.21 GPIOs
- 4.22 Power on/off and reset interface
- 4.23 Antenna interface
- 5 Product characteristics
- 6 Design Guideline
- 7 Storage, Production and Package
- 8 Safety Information
- 空白页面
- 空白页面
L508 Hardware Design
Copyright© Shanghai Mobiletek Communication Ltd 23
3 Mechanical Dimensions
This module is 135-PIN LCC+LGA packaging module. The package size is 30*30mm. The Pin 1
position is identified by a ground pad with a triangle at the bottom.
3.1 Mechanical Dimensions of Module
Figure 4 Top, Bottom, Sides Dimensions (Unit: mm)
3.2 Recommended Footprint
The recommended soldering pads are as follows, which can also be obtained directly from our
company.