Manual

www.lynnelec.com
MC-SFP-10km
1310 nm Single-mode Transceiver, 10.5dB margin
Small Form Pluggable (SFP), 3.3 V
1.0625Gbd Fiber Channel/1.25 Gigabit Ethernet
TEC Opitx Solutions
Division of Lynn Electronics Corp.
154
Railroad Drive • Iv
y
land
,
PA. 18974
Typical BER Performance of Receiver versus Input Optical Power Level
1.E-12
1.E-11
1.E-10
1.E-09
1.E-08
1.E-07
1.E-06
1.E-05
1.E-04
-2.5 -2 -1.5 -1 -0.5 0 0.5
Relative Input Optical Power (dB)
BER
The figure shows the relationship between typical trade-off of BER and Relative Input Optical Power. Besides the
required BER =1  10

12
of the Gigabit Ethernet Physical Layer Standard, the transceiver can be operated at other Bit-
Error-Rate conditions. The Relative Input Optical Power in dB is referenced to the actual sensitivity of the device. For
BER conditions better than 1  10

12
, more input signal is needed (+dB).
Eye Diagram
Transmitter Receiver
Signal pattern: PRBS 7
Signal pattern: PRBS 7
Input Power: 20 dBm