Manual

www.lynnelec.com
MC-SFP-10km
1310 nm Single-mode Transceiver, 10.5dB margin
Small Form Pluggable (SFP), 3.3 V
1.0625Gbd Fiber Channel/1.25 Gigabit Ethernet
TEC Opitx Solutions
Division of Lynn Electronics Corp.
154
Railroad Drive • Iv
y
land
,
PA. 18974
Receiver Electro-optical Characteristics
Vcc = 3.1 V to 3.5 V, T
A
= 0
°
C to 70
°
C
PARAMETER SYMBOL MIN TYP. MAX UNITS NOTE
Optical Input Power-maximum
P
IN
3 --- --- dBm BER < 10

12
Optical Input Power-minimum
(Sensitivity)
P
IN
--- ---
20
dBm
BER < 10

12
Operating Center Wavelength

C
1260 --- 1610 nm
Optical Return Loss ORL 12 --- --- dB
Receiver Electrical 3dB Upper
Cutoff Frequency
--- --- --- 1500 MHz
Signal Detect-Asserted
P
A
--- --- 20 dBm
Signal Detect-Deasserted
P
D
31 --- --- dBm
Stressed Receiver Sensitivity
--- --- 14.4 dBm
Note 1, 2
Differential Output Voltage V
DIFF
0.37 --- 2.0 V
Data Output Rise, Fall Time
(2080%)
T
r, f
--- --- 0.35 ns
Receiver Loss of Signal Output
Voltage-Low
RX_LOS
L
0 --- 0.5 V
Receiver Loss of Signal Output
Voltage-High
RX_LOS
H
2.4 --- V
CC
V
Receiver Loss of Signal Assert
Time (off to on)
t
A,RX_LOS
--- --- 100
μ s
Receiver Loss of Signal Assert
Time (on to off)
t
D,RX_LOS
--- --- 100
μ s
Note 1: Measured with conformance test signal at TP3 for BER = 10

12
at the eye center.
Note 2: Measured with a transmit signal having a 9 dB extinction ratio. If another extinction ratio is used, the Stressed receiver
sensitivity should be corrected for the extinction ratio penalty.