Manual

ManualsBrandsLynn Electronics ManualsHardwareMC-SFP-10km

www.lynnelec.com

MC-SFP-10km

1310 nm Single-mode Transceiver, 10.5dB margin

Small Form Pluggable (SFP), 3.3 V

1.0625Gbd Fiber Channel/1.25 Gigabit Ethernet

TEC Opitx Solutions

Division of Lynn Electronics Corp.

154

Railroad

Drive

•

land

PA.

18974

Features

 Compliant with IEEE802.3z Gigabit Ethernet

Standard

 Compliant with Fiber Channel 100-SM-LC-L

standard

 Industry standard small form pluggable (SFP)

package

 Duplex LC connector

 Differential LVPECL inputs and outputs

 Single power supply 3.3V

 TTL signal detect indicator

 Hot Pluggable

 Class 1 laser product complies with EN 60825-1

 RoHS compliant

Application

 Distributed multi-processing

 Switch to switch interface

 High speed I/O for file server

 Bus extension application

 Channel extender, data storage

Ordering Information

PART NUMBER INPUT/OUTPUT SIGNAL DETECT VOLTAGE TEMPERATURE

MC-SFP-10Km AC/AC TTL 3.3V

C to 70

Absolute Maximum Ratings

PARAMETER SYMBOL MIN MAX UNITS NOTE

Storage Temperature T

40

Supply Voltage Vcc

0.5

6.0 V

Input Voltage V

0.5

Vcc V

Output Current I

--- 50 mA

Operating Current I

--- 400 mA

Summary of content (10 pages)

PAGE 1
MC-SFP-10km www.lynnelec.com 1310 nm Single-mode Transceiver, 10.5dB margin Small Form Pluggable (SFP), 3.3 V 1.0625Gbd Fiber Channel/1.25 Gigabit Ethernet Features Compliant with IEEE802.3z Gigabit Ethernet Standard Compliant with Fiber Channel 100-SM-LC-L standard Industry standard small form pluggable (SFP) package Duplex LC connector Differential LVPECL inputs and outputs Single power supply 3.
PAGE 2
MC-SFP-10km www.lynnelec.com 1310 nm Single-mode Transceiver, 10.5dB margin Small Form Pluggable (SFP), 3.3 V 1.0625Gbd Fiber Channel/1.25 Gigabit Ethernet Recommended Operating Conditions PARAMETER Ambient Operating Temperature Supply Voltage Supply Current SYMBOL TAMB Vcc ITX + IRX MIN 0 3.1 --- MAX 70 3.5 300 UNITS °C V mA NOTE Transmitter Electro-optical Characteristics Vcc = 3.1 V to 3.
PAGE 3
MC-SFP-10km www.lynnelec.com 1310 nm Single-mode Transceiver, 10.5dB margin Small Form Pluggable (SFP), 3.3 V 1.0625Gbd Fiber Channel/1.25 Gigabit Ethernet Receiver Electro-optical Characteristics Vcc = 3.1 V to 3.5 V, TA = 0 °C to 70 °C PARAMETER SYMBOL MIN TYP.
PAGE 4
MC-SFP-10km 1310 nm Single-mode Transceiver, 10.5dB margin Small Form Pluggable (SFP), 3.3 V 1.0625Gbd Fiber Channel/1.25 Gigabit Ethernet www.lynnelec.
PAGE 5
MC-SFP-10km 1310 nm Single-mode Transceiver, 10.5dB margin Small Form Pluggable (SFP), 3.3 V 1.0625Gbd Fiber Channel/1.25 Gigabit Ethernet www.lynnelec.com Typical BER Performance of Receiver versus Input Optical Power Level 1.E-04 1.E-05 1.E-06 BER 1.E-07 1.E-08 1.E-09 1.E-10 1.E-11 1.E-12 -2.5 -2 -1.5 -1 -0.5 0 0.5 Relative Input Optical Power (dB) The figure shows the relationship between typical trade-off of BER and Relative Input Optical Power.
PAGE 6
MC-SFP-10km www.lynnelec.com 1310 nm Single-mode Transceiver, 10.5dB margin Small Form Pluggable (SFP), 3.3 V 1.0625Gbd Fiber Channel/1.25 Gigabit Ethernet Dimensions DIMENSIONS ARE IN MILLIMETERS ALL DIMENSIONS ARE 0.2mm UNLESS OTHERWISE SPECIFIED Unit: mm TEC Opitx Solutions Division of Lynn Electronics Corp. 154 Railroad Drive • Ivyland, PA.
PAGE 7
MC-SFP-10km 1310 nm Single-mode Transceiver, 10.5dB margin Small Form Pluggable (SFP), 3.3 V 1.0625Gbd Fiber Channel/1.25 Gigabit Ethernet www.lynnelec.com SFP host board mechanical layout L A S L A S LEGEND A S S 1.PADS AND VIAS ARE CHASSIS GROUND 2.THROUGH HOLES, PLATING OPTIONAL 3.HATCHED AREA DENOTES COMPONENT AND TRACE KEEPOUT(EXCEPT CHASSIS GROUND) 4.
PAGE 8
MC-SFP-10km 1310 nm Single-mode Transceiver, 10.5dB margin Small Form Pluggable (SFP), 3.3 V 1.0625Gbd Fiber Channel/1.25 Gigabit Ethernet www.lynnelec.com Assembly drawing 1.7¡ Ó 0.9 3.5¡ Ó 0.3 41.73¡ Ó 0.5 PCB 9.8 MAX 11.0 REF. 15.25¡ 0Ó.1 10.4¡Ó0.1 CAGE ASSEMBLY 0.4¡Ó0.1 BELOW PCB 15.0 MAX BEZEL 16.25¡ Ó 0.1 MSA-SPECIFIED BEZEL PCB DIMENSIONS ARE IN MILLIMETERS Unit: mm TEC Opitx Solutions Division of Lynn Electronics Corp. 154 Railroad Drive • Ivyland, PA.
PAGE 9
MC-SFP-10km www.lynnelec.com 1310 nm Single-mode Transceiver, 10.5dB margin Small Form Pluggable (SFP), 3.3 V 1.0625Gbd Fiber Channel/1.
PAGE 10
MC-SFP-10km www.lynnelec.com 1310 nm Single-mode Transceiver, 10.5dB margin Small Form Pluggable (SFP), 3.3 V 1.0625Gbd Fiber Channel/1.25 Gigabit Ethernet Eye Safety Mark The MC-SFP series single mode transceiver is a class 1 laser product. It complies with EN 60825-1 and FDA 21 CFR 1040.10 and 1040.11. In order to meet laser safety requirements the transceiver shall be operated within the Absolute Maximum Ratings. Required Mark Class 1 Laser Product Complies with 21 CFR 1040.10 and 1040.