Installation Guide

Use alignment guide found in parts bag to

align glide-frame inside of cabinet.

Turn screws

until just snug

Set the assembled double

drawer onto glide-frame with

mounting holes aligned.

Check for adequate cabinet

and door clearance.

Adjust glide frame position as needed.

Set assembled drawers back onto glide-frame with

mounting holes in base drawer and glide-frame aligned.

Attach base to glide frame using

mounting screws.

Only gently tighten.

Check

Align

2” min.

Mount

Make sure arrows

are pointing to the

front of the cabinet.

Alignment

Guide

Roll-Out Double Drawer 012507-REV C

If you have questions, please call 800-733-5965

•Drill 4 starter holes using a 1/8”

diameter drill bit.

•The use of a power screwdriver.

Recommended:

Move glide

forward

Install front

screws rst

2” min.

Remove assembled drawers from glide-frame.

Move glide rails slightly forward as shown and install glide-frame

into cabinet using wood screws found in parts bag.

Install

Use only outer

holes at front.

2 extra screws

optional

in back