Manual

7
run the dispenser at low speed. The feed tube will turn slowly
until the button is released.
D-3 Auto - Trickle Mode
You can speed up the dispensing process by adding powder to
the powder pan and then bring it up to the selected weight by
pressing the ENTER button. By utilizing a powder measure to
add almost all the powder to the powder pan and using the
dispenser to automatically finish trickling to the exact weight,
the dispensing time will decrease considerably.
E. Storing New Memory
The 1200 DPS will store up to 20 of your favorite loads in
memory. Each load in memory has three input lines.
Cartridge Name C=___
Powder Type P=___
Weight of Powder W 0.0
A load is not stored in memory until all three input lines
have been completed and the enter button pushed after the
weight is input. To edit input mistakes made during entry,
the BACK SPACE button will remove the last character
entered or pushing the CANCEL button will erase the
entire line.
To store loads in memory:
1. Press the NEW MEM button. The LCD will display
“Mem=01” indicating the first memory position.
2. Press the ENTER button. The LCD will flash “CART”,
(cartridge) then display “C=_”
3. Enter the name of the cartridge using the cell phone type
keypad. Pressing the same key repeatedly will change the
letters or number represented by that key. When the proper
number or letter is present, wait several seconds and the
display will shift to the next space. When the name is