Manual

D. Scale and Dispense Mode

1. The scale and dispenser are now active. Place the powder

pan onto the platform and press the CAL/ZERO button to

zero the scale.

2. Place the desired smokeless powder (black powder or

Pyrodex should NEVER be used) into the powder

reservoir.

3. The scale will read in grains (default) unless changed. To

select the weighing unit desired, press the UNIT button to

select the appropriate grains, grams or ounces.

4. Key in the desired charge weight using the keypad. If you

make a mistake press the CANCEL button to clear the

complete charge weight or press BACKSPACE to clear

the last digit. While the desired charge weight is displayed,

press the ENTER button to dispense powder. The

dispenser will stop automatically when the selected charge

weight is reached. We recommend that the first several

charges be placed back into the reservoir. This allows the

1200 DPS to fully stabilize and fill the charge tube with

powder. After a charge is dispensed, the LCD will display

“CT=001” indicating the first charge for 2 seconds. This is

a count of the number of charges that have been dispensed.

5. Press the ENTER button again to dispense another charge

at the selected weight in memory.

6. To pause the dispenser while a charge is being dropped,

press the ENTER button. Press the ENTER button again

to resume charging.

7. The dispenser will continue to drop the selected weight

until it is changed. To change the selected weight, key in a

new weight on the keypad and press the ENTER button.

The dispenser will drop the new selected charge weight.

D-2 Manual - Trickle Mode

To manually dispense a charge, press and hold the FAST

button. The dispenser will run the feed tube at high speed until

the button is released. Press and hold the TRICKLE button to