Manual
4
Congratulations on your purchase of the Lyman 1200 DPS (Digital
Powder System). This is a precision piece of equipment and should
be handled with care. Before using the 1200 DPS Powder
Dispenser, please read these instructions fully and become familiar
with the key pads and other operating features listed in the
diagrams. If you have read the instructions and you still do not
understand some of the operations, call us at 1-800-22-LYMAN
except AK, HI, CT and foreign, who may call 860-632-2020. This
operation manual should be kept with the 1200 DPS at all times for
easy reference.
Introduction
Your New 1200 DPS (digital powder system) is the state of the art
in reloading technology. It is the fastest powder dispenser
available and contains a programmable memory to store and recall
all of your favorite loads quickly and easily.
A. Set-Up
1. Select a location for the 1200 DPS that is level and stable.
It is recommended that the 1200 DPS be located away from
a loading bench equipped with a reloading press. Most
benches are not heavy enough to prevent vibrations being
transferred to the scale. The scale should also be away from
any source of air currents. The 1200 DPS is sensitive
enough to have readings affected by any of these
conditions.
2. Plug the power adapter into a wall outlet and connect it to
the dispenser. Install the powder reservoir tube by pressing
it into the top of the unit above the feed tube.
3. Remove end cap from powder feed tube.
B. Warm-Up and ON/OFF
1. Press the ON/OFF button to turn on the 1200 DPS.