Manual

WARNINGS AND CAUTIONS:

• If the 1200 DPS does not read zero on the display,

DO NOT DISPENSE POWDER. The scale must

be zeroed before use. If powder is dispensed with a

scale that does not read zero, the charge will not be

correct and could be dangerous.

• Be careful not be get powder between the platform and

the scale body. This can affect scale readings. If powde

does drop into this area, carefully remove it with the

supplied brush. Do not attempt to remove the platform.

• Slide switch on underside of unit is to set the (Hz). This

is factory preset for domestic models and should not

need to be changed. Should you have a problem with

your scale, make sure the switch is set to match the input

voltage on the power adapter. Domestic 115V is 60 Hz

and 220V is 50Hz.