Installation Guide

LY & S Assembly Instructions

STEP 1

STEP 2

Detach the transformer and wings from the back and bottom of the Seat

(B). (See Figure 1.)

Attach the Back (A) to the Seat (B). Ensure the latches fit well. (See Figure

2.)

Figure 1 Figure 2

STEP 3

STEP 4

Pass the headrest cable through the hole in the back of the seater (See

Figure 3.)

Connect the headrest cable to the power button control cable, and place

them behind the flap. Connect the transformer cable to the power button

control cable, and place them behind the flap(See Figure 4.)

Figure 3 Figure 4

Assembly Instructions

2/3