V9 Installation manual Version 2.0 LXNAV d.o.o. • Kidričeva 24a, 3000 Celje, Slovenia • tel +386 592 33 400 fax +386 599 33 522 info@lxnav.com • www.lxnav.
V7 Version 2.0 1 Important Notices 1.1 2 3 March 2012 3 Limited Warranty 3 Packing Lists Installation 4 5 3.1 Installing the LXNAV V9 3.2 Connecting LXNAV V9 3.3 Cutout of V9 3.4 Ports and Wiring 3.4.1 LXNAV V9 ports 3.4.1.1 Main port 3.4.1.2 Audio port 3.4.2 V9 vario unit wiring 3.
V7 Version 2.0 1 March 2012 Important Notices The LXNAV V9 system is designed for VFR use only as an aid to prudent navigation. All information is presented for reference only. Terrain, airports and airspace data are provided only as an aid to situation awareness. Information in this document is subject to change without notice.
V7 Version 2.
V7 Version 2.0 3 March 2012 Installation The V9 vario unit and any additional vario indicators each require a standard 57 mm cut-out. Three pressure connectors are fitted to the back of the V9 vario unit. A label shows their functions. • Pstatic means static pressure connector. • Ptotal means pitot or total pressure connector. • TE means total energy TE connector.
V7 Version 2.0 March 2012 Even though there is an automatic fuse in the instrument it is VERY IMPORTANT to use an external fuse (max. 3A). Power supply cables should use a minimum of 0.5 mm² wires. To prevent damage to the LX9000/8000/8080 digital unit after a short circuit on the RS485 bus there is an automatic fuse. If a short circuit occurs then the 57 mm unit will appear not to work anymore. The reason is not the defect of 57 mm unit – it is due to the hot automatic fuse.
V7 Version 2.0 March 2012 3.4 Ports and Wiring 3.4.1 LXNAV V9 ports Static probe Total pressure probe (Pitot) Main port 3.4.1.1 Main port On main port is connected V9 wiring. 3.4.1.2 Audio port Here is connected speaker with standard 3mm phono jack.
V7 Version 2.0 3.4.2 March 2012 V9 vario unit wiring V5 V1.
V7 Version 2.0 March 2012 Enter password 89891 and press ENTER. The LX9000 will automatically search for an update file. If more than one update file is found a selection dialogue will appear. Select appropriate update file and wait until update will finish. V9 update consist ot two firmwares (SBOX and VIND).