Operation Manual

V7 Version 3.01 October 2013
Page 9 of 48
4.3 Switching on the Unit
A short press of the button with turn on the V7. The first LXNAV welcome screen will
appear with some system information (Device name, Version, Serial number...)
V7D cannot be powered up if V7 is not already powered up.
When the boot procedure is completed, setup elevation dialogue is shown.
By default setting Set Elevation page is disabled. It can be enabled in Setup
QNH&RES menu.
Push button also has power ON and OFF functions.
4.4 User Input
The LXNAV V7 user interface consists of many multi language dialogues which have different
input controls. They are designed to make input of names, parameters, etc., as easy as
possible. Input controls can be summarised as:
• Text editor
• Spin controls (Selection control)
• Checkboxes
• Slider control
To move the function from one control to another, rotate the rotary knob up or down as
follows:
• Clockwise rotation will select the next control.
• Counter clockwise rotation will select the previous control. PUSH button enters the
selected feature.