Operation Manual

V7 Version 3.01 October 2013
Page 26 of 48
5.3.7 Display
The display menu controls screen brightness.
• Use Brightness control to adjust intensity of the LCD backlight.
• Mechanical needle, which can indicate vertical speed, speed to fly value, netto vertical
speed, or Relative vertical speed in vario or SC mode.
• Upper and Lower Numeric Display: The parameter displayed can be configured
separately for Vario mode and SC mode. Following parameters can be displayed:
average vertical speed, local time, flight time, task remaining time, Altitude (NN
altitude), Distance (distance to the navigation point), Arrival altitude (final glide altitude
difference to the navigation point), Speed (TAS), Leg speed (speed on leg), QNH (ft)
(NN altitude in ft), Flight levels, Outside air temperature, Battery voltage, Average
NettoQFE, Total Altitude.
• Blue Arrow Symbol enables or disables to display MC symbol
• Green T Symbol enables or disables the display thermal symbol
• Red Diamond Symbol have three options:
o OFF Red diamond is not displayed
o Average vario Shows average vario
o G-meter shows actual G-force (one line means 1g, the range of
accelerometer indication is +/-5g, you should not look at vario dial)
• Bar has three options: