Operation Manual

V7 Version 3.01 October 2013
Page 15 of 48
5.3 Settings Mode
In the setup menu users can configure the LXNAV V7. Turn the knob to select the
appropriate setup item. Press the PUSH button to enter a menu. A dialogue or sub-menu
will open.
5.3.1 Navigate
In this menu navigation settings can be configured.
If Navigate to home is enabled, LXNAV V7 will navigate back to the takeoff point. This
position has been stored in memory just before takeoff but only if GPS OK status is showing.
Navigate to home will not work if “use GPS data” is not checked.