Operation Manual

V7 Version 3.01 October 2013
Page 11 of 48
4.4.5 Slider selector
Some values like volume and brightness are displayed as a slider
With push button you can activate slider control, then with rotation of the knob you can
select the preferred value and confirm it with the push button.
4.5 Switching off
By pressing the push button for app. 5 seconds, LXNAV V7 will turn off. Same procedure is
for V7D, if V7D is on and we are attempting to switch off V7, V7D will also switch off.
All settings are saved in the power off procedure. We strongly recommend
switching off the unit using push button and not use a separate master switch..
If the system is powered off by a master switch changed data will not be saved.
Flight parameters at takeoff like target altitude and position will remain in stored
memory so your final glide calculations are not affected.