Operation Manual

V3 Version 1.0 November 2012
Page 10 of 29
4.3 Switching on the Unit
A short press of the button with turn on the V3. The first LXNAV welcome screen will
appear with some system information (Device name, Version, Serial number...)
When the boot procedure is completed, setup elevation dialogue is shown.
By default setting Set Elevation page is disabled. It can be enabled in Setup QNH
menu.
Push button also has power ON and OFF functions.
4.4 User Input
The LXNAV V3 user interface consists of many dialogues which have different input controls.
They are designed to make input of names, parameters, etc., as easy as possible. Input
controls can be summarised as:
• Text editor
• Spin controls (Selection control)
• Checkboxes
• Slider control
To move the function from one control to another, rotate the rotary knob up or down as
follows:
• Clockwise rotation will select the next control.
• Counter clockwise rotation will select the previous control. PUSH button enters the
selected feature.
4.4.1 Text Edit Control
The Text Editor is used to input an alphanumeric string; the picture below shows typical
options when editing text. Use the knob to change the value at the current cursor position.