Operation Manual

NANO
3
Version 1.0 April 2014
Page 32 of 33
7 Troubleshooting
Q: My computer does not recognize the NANO
3
as a USB mass storage device?
A: Make sure that the NANO
3
is turned off before connecting to the computer.
Q: When I power on see all green LEDs blinking and the red LED is illuminated.
A: This means that your flight recorder has lost security. Contact us for further details.
Q: When I power on I see one green LED and the red LED is illuminated.
A: There is a problem with internal Solid State Disc.
Q: Is the internal LiIon battery for the NANO
3
end-user replaceable or would I need to send
the unit back to LXNAV or a dealer to have the battery replaced?
A: User can replace the Li-Ion Battery. See chapter 4.11
Q: I can't read the NANO
3
on my notebook.
A: Change power management scheme on your notebook, or connect notebook to power
supply.
Q: When I connect the NANO
3
to my notebook, message "USB device connected" would
appear, disappear, appear, etc. from the laptop screen.
A: Change power management scheme on your notebook, or connect notebook to power
supply.
Q: Can I open files from the NANO
3
on the Apple computer?
A: Yes.
Q: I run Ubuntu on my laptop so cannot run NanoConfig.exe.
A: NanoConfig is Windows application, that runs only on windows operating system.
Q: Can I declare task with an OUDIE?
A: Yes, declaration can be done via serial cable or over BlueTooth. Please read step by step
instructions
http://www.lxnav.com/downloads/manuals/FAQ_Upload_declaration_from_OUDIE%20to%2
0NANO.pdf
Q: When I run nanoConfig, I'm getting errors.
A: Probably Microsoft Net Framework is not installed.