Operation Manual

NANO
3
Version 1.0 April 2014
Page 30 of 33
6.4 NANO3 config for Android devices
NanoConfig can be downloaded from LXNAV web site or Google Play Market. The
NanoConfig is a configuration tool for the NANO
3
. The user can easily modify flight recorder
parameters, edit pilot and glider information, edit the declaration, and transfer flights from
the NANO
3
to a smart phone.
NanoConfig consists of four tabs: Main, Logbook, Pilot, Task and Settings.
6.4.1 Connecting and pairing the NANO
When you run the NanoConfig on a smart phone, the program will first ask you to turn on
Bluetooth, if it’s not turned on already.
Over the menu button is access to the scan function, which will scan for BlueTooth devices.
If the NANO3 is turned on and BlueTooth functionality in the NANO
3
is enabled, it will appear
on the scanned list. Choose nano. The first time it will be necessary to pair the NANO
3
and
the Smart Phone together. More about pairing in Ch.4.9.
6.4.2 Main page
On the main tab, information about the NANO
3
and its GPS status.
6.4.3 Downloading flights
The first time you access this tab, NanoConfig will automatically start reading flights from the
connected NANO
3
. Downloading always starts from the most recent to the oldest flight. If
you have a lot of flights in the NANO
3
’s memory, the transfer of the logbook can be
interrupted with the BACK button.