Operation Manual

NANO
3
Version 1.0 April 2014
Page 25 of 33
6 Configure NANO
3
Flight declarations can be uploaded to the NANO
3
in four different ways:
• Directly on the NANO
3
• Using the NanoConfig program on PC,
• Bluetooth (NanoConfig for Android, Oudie, XCSoar,..)
• Serial interface (PDAs, Oudie, XCSoar)
Declarations are stored in the SYSTEM folder in a file called decl. The declaration file is
formatted as a standard IGC header file. It is recommended that you do not try to modify
this file yourself.
6.1 Directly On NANO
3
6.1.1 Pilot information
Detailed information is written in Ch.5.3.1
6.1.2 Declaration and editing of a task
In the Task page, the user can enter or edit the task, which will then be automatically
declared when you leave this page. Waypoints can be loaded into a task from the active
waypoint file.
A Task can be entered in a very simple way. In the task page you can press the edit button.
Using the up or down button you can highlight an existing waypoint or empty space and
then set a new waypoint. By pressing the Ins. (insert) button you can start browsing
through all of the waypoints in the selected CUP file.
Selecting from a list of waypoints is very intuitive. The NANO
3
will only offer you a choiceof
characters that are available from the list of waypoint names available. Using the button >>
you can move to the next character (right), the red part of the label B indicates one space
back or one character to the left uning a longer press of the button. A similar function for the
OK button, where you can confirm a selected waypoint or with the C, you can cancel the
selection of a waypoint. The previous waypoint will then be selected.
When you are back in the Task menu, you can insert or delete D a waypoint.