Operation Manual

NANO
3
Version 1.0 April 2014
Page 19 of 33
5 Working with the NANO
3
5.1 Tree structure
The NANO
3
has four modes, info, Waypoint, Task and Setup mode. Info mode has two
subpages, where you will find all the necessary information about the status of the NANO
3
.
5.2 Main navigation screen description
The main navigation screen consists of a map with coloured airspace, waypoints with names,
vario tape on the left and status bar on the top. The vario tape and vario dynamics can be
configured in the Setup-Hardware-Vario menu. If you don’t want to see the vario tape, you
can switch it off. The status line indicates the status of the GPS, indicates the chosen
waypoint that you are navigating to, the status of the Bluetooth device and the battery
level. In the centre top of the map is the “off course” indicator, which helps the pilot fly in
the right direction. At the bottom of the map screen are three nav boxes, showing bearing,
distance to the target and the pressure altitude.
Final glide calculations will be available in version 2.0
Batt Level
GPS status
Nav. target
BT status
Vario average
Vario needle
Nav boxes