Operation Manual

8 Installation
8.1 V5 and V9 vario
The LX8000 digital unit is installed in an aperture 93.5 mm wide and 81.5 mm high. The V5
vario unit and any additional vario indicators each require a standard 57 mm cut-out. Three
pressure connectors are fitted to the back of the V5 vario unit. A label shows their functions.
V9 vario has same functionality than V5, the only difference is, that has built in
inertial platform (AHRS)
• P
static
means static pressure connector.
• P
total
means pitot or total pressure connector.
• TE means total energy TE connector.
If the unit is to be configured for electronic TE compensation the connections are as follows:
• P
static
Static
• P
total
Pitot or Total pressure
• TE/P
static
Static
If the unit is to be configured for pneumatic TE compensation using a TE tube, then the
connections are:
• TE/P
static
TE tube
• P
static
Static
• P
total
Pitot or Total pressure