Operation Manual

5.1.15 Language
The LX8000 can run in different languages.
Select the desired language. The LX8000 will reload and restart in the new language. If
your language is not listed and you feel able to become a translator for the LX8000 please
do not hesitate to contact us.
5.1.16 Passwords
There are several passwords which run specific procedures as listed below:
• 00111 displays information about the LX8000 and its sensors.
• 01049 will perform “Auto zero”; will set vario and speed to zero.
• 30000 browses through installed files (use with caution).
• 41000 first or forced update of Flarm.
• 42000 update of Flarm through PC port (default).
• 43000 update of Flarm through Colibri port.
• 44441 shows debug information.
• 46000 enables/disables the co-pilot remote stick. This option is used if you want to
drive a single LX8000 via two remote sticks in a side-by-side aircraft (e.g. Stemme S10).
• 55556 will enable Condor simulator input via the PC port.
• 55557 will enable Condor simulator input via the IGC port.
• 89891 is used to initiate the LX8000 firmware update procedure.
• 99999 will erase all flights stored on the LX8000.