Operation Manual

LX Styler version 1.0 December 2009
Page 6 of 16
 Graphical representation of LX8000 navigational page
More details about the Navigation Page Editor are given in chapter 2.4 and 3.2.
2.2 Managing configurations
The complete look and feel of the navigational pages is stored in a configuration file with
.lxprofile extension. Configuration file can be newly created or it can be also downloaded
from the LX8000.
To download configuration file from LX8000 enter Setup mode on LX8000 and select Profile
and Pilots menu item. Press ENTER and MORE>> button twice. Press TO SD to copy
selected profile to a SD card.
You can now load stored configuration file in LX Styler through File->Open Configuration or
pressing open configuration icon on toolbar.
To create a new configuration press File->New Configuration or select new configuration
icon on toolbar.
The configuration file consists also of other settings essential for the LX8000.
Variometer setting, pilot information, files in use and glider polar are also stored
in the configuration file. This settings cannot be modified with LX Styler and can
be changed only on the LX8000 itself.
If you create a new profile all this settings will be set to default values and you
will have to modify them on the LX8000.
Once configuration that suits your needs has been created you can save it with File->Save
Configuration or by clicking the save configuration icon on a toolbar.
2.3 Managing navigational pages
Navigational pages can be easily moved, copied or removed using the mouse. A single left
click on a selected navigation page will open Navigation Page Editor. Press right mouse
button and a pop up menu will open.
Select appropriate menu item to add, remove, copy or edit page. You can also drag page to
another location. Press left mouse button and while holding it down, drag selected
navigational page to desired location. A red line will indicate new position of page. Release
mouse button to place page.