Operation Manual

LX Styler version 1.0 December 2009
Page 14 of 16
Target parameters
Title
Description
Dis
Distance to target
DisInv
Distance to target in other units
Arrival
Arrival altitude at target
ArrMc0
Arrival altitude at target with MacCready setting=0
ReqAlt
Required altitude to reach target
Brg
Bearing to target
Radial
Radial from target
To
Steering course to target
ETA
Estimated time of arrival
ETE
Established time en route
reqE
Required glide ratio to target
Target
Target name
Req.Mc
Required MacCready value to target, which takes into account also
wind.
Elevation
Target elevation
Rwy.Dir
Target runway direction
Rwy.Len
Target runway length
Frequency
Target frequency
Sunrise &
Sunset
Sunrise and sunset time at target location
Description
Additional description of target
toWind
Head/tail wind to target. There are two values displayed. First is
calculation based on bearing and wind direction and second is
difference between TAS and GS.
Task parameters
Title
Description
tDis
Task distance or task remaining distance
Fin.Elev
Task finish elevation
tArr
Arrival altitude on task finish calculated through all remaining task
points
tArrMc0
Arrival altitude on task finish calculated through all remaining task
points with MacCready set to 0
tETA
Task estimated time of arrival
tETE
Task established time
tRemain
Task remaining time
tDelta
Task delta time. A difference between tETA and tRemain
tskE
Required task glide ratio
Tsk.Sp
Task speed so far
tReq.Sp
Task required speed calculated from tRemain and tDis
60’.Sp
Last 60 minutes speed
tReq.Mc
Required MacCready value towards next task point, which takes into
account also wind.
trqSTF
Required speed to fly calculated from required MacCready
xTrk
Current leg cross track distance