Operation Manual

LX Styler version 1.0 December 2009
Page 10 of 16
3 Commands
3.1 Main window
Main window commands are new configuration, open configuration, save configuration,
recent files and exit. Recent files are displayed only if a previous configuration is opened.
About dialog will display program version.
3.1.1 New configuration
New configuration will create a new configuration file with default navigational pages and
default settings.
Configuration file consists also of other settings essential for LX8000. Variometer
setting, pilot information, files in use and glider polar are also stored in
configuration file. These settings cannot be modified with LX Styler and can be
changed only on LX8000 itself.
If you create a new profile all this settings will be set to default values and you
have to modify them on the LX8000.
3.1.2 Open configuration
Open configuration opens existing configuration file.
3.1.3 Save configuration
Save configuration saves current configuration file.
3.1.4 Exit
Exit will close LX Styler. Please make sure current configuration is saved before exiting
program as no prompt will be given that configuration is not saved. You may also exit
program pressing Alt+F4 key combination.
3.1.5 Edit page
When you right click on a page a popup menu will appear. Select Edit Page item and
Navigation Page Editor will then open.
3.1.6 Add page
Select this option to add a blank page. Page can be added before selected page or after it.
3.1.7 Remove page
Select Remove page to delete a page.
3.1.8 Copy page
Page can be also copied. Select a page and copy it to a local clipboard. Once page is copied
it can be pasted afterwards.
3.1.9 Paste page
Paste a page. This will create a copy of a page in the clipboard.