Operation Manual

5.5.5.5 Airspace
The Airspace dialogue shows a list of airspace zones in the vicinity of your position. Vertical
and horizontal distances are calculated to all airspace zones in the list.
The VIEW button toggles the list views. When the STATUS button is pressed the status of
the selected airspace zone will toggle between OFF always, OFF today, OFF hh:mm and
enabled.
If the EDIT button is pressed a new dialogue will open where you can modify properties for
the selected zone. Refer to Chapter 5.1.5.3 for more details.
When a zone is alarmed the distance will be coloured orange.
5.5.5.6 Mark
If you press the MARK button a new way point will be created with the current latitude and
longitude and elevation based on the terrain database. The way point name is generated
from the current date and time separated by the minus character and preceded by an
underscore.
Way point data can be modified. Refer to Chapter 5.6.1 for more details. Press the OK
button to save a marked way point or press CANCEL to exit without saving. Press GOTO
button to navigate immediately to selected point.
5.5.5.7 Flarm
Press the Flarm button to view the list of other aircraft received by Flarm. A list with all
received aircraft since the last switch on is shown.
The list is sorted by distance. Select the desired Flarm target and press the GOTO button.
You will start navigating to this Flarm position. Instead of Flarm device ID you can also