Operation Manual

5.4 Statistics Mode
The Statistics mode operates in two different ways. During flight statistical data for the
current flight is shown whilst on the ground the logbook for all stored flights is displayed.
5.4.1 Logbook
If a SD card or USB stick is inserted into the LX8000 the user can copy a selected flight to it.
Select the desired flight using the lower-right knob and then press the appropriate button.
A flight is automatically copied to the SD card and/or USB stick if it has been
inserted into the LX8000 when the message “Calculating security” is displayed.
This message appears when landing conditions are met.
You can also delete a flight using the Files and Transfer menu (see Chapter 5.1.5.7).
5.4.2 Statistics during Flight
Using the lower-right knob the user can change the statistics page. There are three pages
available:
• Flight statistics displays data for whole flight. Dis.flown is the optimised distance.
XC speed is average speed corrected for altitude difference. Average vario is used in
this calculation.
• Task statistics displays data for the started task. Distance flown is the distance that
has already been flown on the task.
• The last 60 minutes statistics displays data for the last 60 minutes of flight. If the task
was started then Dis.flown is the distance flown on the task for the last hour otherwise
it is the optimised distance. If the task distance is used a remark (On Task) is displayed
in the header.