Operation Manual

Check the Show km lines item to see lines which indicate what will be the size of the
completed triangle.
These lines will always be plotted in kilometres scale regardless of the Units value.
5.1.6.6 Task
Use this dialogue to define how a task is drawn in task mode.
Task colour defines the colour of task lines. Obs.zone colour defines colours for
observation zones. Use the lower-left knob to change transparency of area. 100% means
completely transparent and only the outline will be drawn. 0% means completely solid (not
recommended). When Show flown task is checked also the flown task will be drawn. This
might be useful when flying assigned area tasks.
The Show selected zone only item controls whether all task observation zones are to be
displayed or, if there is only one, then that alone will be shown.
5.1.6.7 Flarm
LX8000 devices can be equipped with the FLARM module. If your instrument is equipped
with FLARM this menu will let you to modify presentation of the Flarm radar display.
Flarm radar is not available if competition or privacy modes are active. Refer to
Chapter 5.1.12.3.
Checking Show Flarm object will enable display of aircraft detected by FLARM.
Colours are designed to present three values. The colour for aircraft more than 100 meters
above your current altitude is defined by the Above Colour item. The colour for aircraft
more than 100 meters below your current altitude is defined by the Below Colour item.
The colour for aircraft that are less than 100 meters below or above your current altitude is
defined by the Near Colour item.
When a signal from a particular aircraft is lost the aircraft remains blinking on the screen for
the duration defined in the Lost device after item (default 120 seconds). After that time
the aircraft symbol will not be displayed.
If the show labels item is checked aircraft altitude and vertical speed are displayed next to
the aircraft symbol. The user can modify size, font style and colour. Select the Font style