Operation Manual

LX8000 (LX8080) Version 2.6 December 2012
Page 116 of 118
10.9 Secondary Vario Indicators
An unlimited number of secondary vario indicators can be connected to the system bus.
RS485 splitting units should be used to extend the bus capacity. The functionality of
secondary units depends on settings made in setup (see chapter 5.1.12.2).
Each unit has two female nine-pin connectors on the back side. Both connectors are 100%
pin to pin compatible and it doesn’t matter which will be used. Any other RS485 bus
operated unit can be any time connected to a free connector port of the vario indicator.