Operation Manual

FlarmView Version 1.01 November 2013
Page 13 of 21
• If you want to have the buttons on left side the complete screen can be rotated.
• If “always hidden” is checked then the button labels are not displayed on main screens.
4.9.2 Warnings
Warnings can be enabled for three different levels (low, important and urgent), separately
A/C (undirected warnings can be enabled), also a distance of A/C warning, where will be
displayed flarm watch. If Alert on A/C mode is disabled, A/C mode distance is not applicable.
Please keep in mind, that bad A/C receiver or false A/C information can be
distracting on FlarmView. To avoid such situation, you can, at any time, uncheck
alerts on A/C mode.
4.9.3 Target
Active timeout adjusts, remaining time of glider on map after last seen.
Inactive timeout adjusts, remaining time of inactive gliders on the list. Inactive gliders are
gliders, where we lost a signal of them, after Active timeout, they became inactive and
remains only on the list.
Zoom mode can be set to automatic (zoom to the target) or manual.