Operation Manual

FlarmMouse Version 1.0 May 2013
Page 13 of 16
6.2.1 Method 1: Standard
• Switch on Flarm (Connect to power)
• Start the flarmtool on your PC/Notebook (contains current firmware)
• Now connect the FlarmMouse with PC /Notebook. (via splitter)
• Connection will establish automatically
• After confirming license agreements, the update will start.
• When finished, switch off the FlarmMouse
6.2.2 Method 2: only if method 1 fails
• Switch the FlarmMouse off (disconnect power)
• Start actual FLARM-Tool (contains current firmware) on your PC/Notebook
• Now connect the FlarmMouse with PC /Notebook. (via splitter).
• Choose „recover“ under the menu item Flarm
• Now press and hold the push button of the FlarmMouse and connect power
• Release the push button as soon as the update bar starts to run.
• When finished, switch off the FlarmMouse
Under the menu item „Flarm“ you will also find the possibility to update the obstacle
database and to change settings in your FlarmMouse.
The FLARM firmware expires periodically. Performing an upgrade is obligatory
then. Information about this you will find under www.flarm.com