Manual

R.E.P.R. MANUAL

LWRC INTERNATIONAL

6.2.4 Upper Receiver Group Disassembly

Start from a Field Strip condition. Pull out the Forward Take-down Pin

to its stop. Start by pushing the pin from the left side of the receiver.

Then pull from the right. Separate the upper and lower receiver.

6.2.4a (Fig. 6n) Remove the Top Rail by loosening the two Pusher

Screws and pushing the upper rail forward

(Fig. 6p) then lift up (Fig. 6q) and remove.

NOTE: The two Pusher Screws are captive and are not supposed

to come free from the Rail handguard Body.

Fig. 6N: Loosen Pusher Screws

Fig. 6P: Push the Top Rail Forward

Fig. 6Q: Lift and remove Top Rail