Manual

R.E.P.R. MANUAL
LWRC INTERNATIONAL
50
51
6.2.2c Once the Cam Pin is removed, pull forward on the
Bolt Assembly to remove it form the Carrier.
6.2.3 Bolt Disassembly
At the Operator level, no further disassembly of the bolt beyond
removing the Extractor is necessary.
Fig. 6K: Remove the Bolt Assembly
6.2.3a (Fig. 6m) Utilize the Firing Pin to push the Extractor Pin and
start it out of the bolt.
6.2.3b Grasp the pin from the opposite side and remove it. Turn
the Bolt over and tap the Extractor out into your palm. Be sure not to
lose the extractor springs and o-ring. See Fig. 6L for a description of
the parts.
Fig. 6L: (L-R) Bolt, Extractor, Extractor Pin, Extractor Spring
Fig. 6M: Remove the Extractor Pin