Manual

R.E.P.R. MANUAL
LWRC INTERNATIONAL
48
49
6.2 DETAILED DISASSEMBLY
This level of disassembly is for Detailed Operator Level Maintenance
of the R.E.P.R. Care must be taken to ensure that small parts are not
lost. The use of a cloth or tarpaulin to catch them is encouraged.
Further disassembly is not required for operator authorized
maintenance and should only be performed by higher echelon
maintenance personnel.
6.2.1 Clear and Field Strip the weapon by following the
instructions in the previous section.
6.2.2 Bolt Carrier Disassembly
6.2.2a (Fig. 6G) Remove the Firing Pin Retaining Pin from the Bolt
Carrier.
6.2.2b (Fig. 6H) Turn the carrier so the Bolt is facing upward and tap
against a surface to remove the Firing Pin.
Fig. 6G: Removing the Firing pin Retaining pin
6.2.2c Ensure the Bolt is retracted into the Bolt Carrier and rotate
the Bolt Cam-Pin 90° counter-clockwise. Pull to remove the Bolt Cam
Pin
Fig. 6H: Tap the Carrier to drop
the Firing Pin
Fig. 6G: Removing the Firing pin Retaining pin
DUPLICATE PHOTO