Manual

R.E.P.R. MANUAL
22
These apply to the PRS stock on the R.E.P.R. 20 only
2.1.6.8 CHEEK ADJUSTMENT (29.)
This knob is used to raise or lower the height of the Cheek Piece (30.).
Facing the left side of the weapon with the stock to the right, the
knob is rotated to the left to raise the Cheek Piece and the right to
lower it.
2.1.6.9 LENGTH OF PULL ADJUSTMENT (31.)
This feature allows the user to optimize your length of pull (buttstock
length) ensuring perfect eye relief with your optic and comfort in an
optimal shooting position.
The stock should be adjusted to be rm against the shoulder pocket
and without neck strain while using the optic. A properly adjusted
stock will reduce perceived recoil and enable faster and more
accurate follow up shots.
LWRC INTERNATIONAL
23
2.1.6.10 EJECTION PORT COVER (21.)
The ejection port cover is spring loaded with a closing detent. It will
automatically open when the Bolt Carrier cycles and remain open
until closed manually. The ejection port cover should always be
manually closed after a course of re and the situation is assessed as
non-threatening.
2.1.6.11 PUSHER SCREWS (19.)
At the front of the Rail Handguard Body (6.) are the pair of Pusher
Screws that keep the Top Rail (5.) correctly indexed to the Rail
Handguard Body. They are captive to the Rail Handguard Body and
will not fall out. The knurled head allows them to be nger tightened
and a slot allows the use of a cartridge rim or coin to torque them
tight. Never use excessive force to tighten these screws. There are
high temperature O-rings that when compressed will prevent the
screws from vibrating loose.
29.
31.