Manual

5
Always use hearing and eye protection when shooting any firearm.
Be familiar with your weapon and its features, controls and operating procedures prior to
shooting. Completely read this manual prior to operating your weapon.
1.5 Weapon’s Conditions
Condition 4: Bolt forward on an empty chamber, ejection port cover closed,
no magazine inserted, and selector lever on safe.
Condition 3: Bolt forward on an empty chamber, ejection port cover closed,
magazine inserted, and selector lever on safe.
Condition 2: Not applicable.
Condition 1: Bolt forward with a round chambered, ejection port cover closed,
magazine inserted, and selector lever on safe.
Range Safe: Bolt locked to the rear, ejection port cover open, no magazine inserted,
and selector lever on safe.
CLEARING YOUR WEAPON – UNLOADING
1. Ensure the muzzle remains pointed in a safe direction.
2. Remove the magazine (if present) by depressing the magazine release and
ejecting the magazine.
3. Depress the bottom portion of the bolt catch and hold.
4. Grasp the charging handle and, ensuring that you are depressing the charging
handle latch, pull it firmly to the rear.
5. Release the bolt catch and push the charging handle forward until it locks back
into the upper receiver.
6. Visually inspect the chamber to ensure there are no rounds or shell casings
present (in low light conditions it may be necessary to physically inspect
the chamber).
7. Once you have determined the weapon to be clear of ammunition depress
the top portion of the bolt catch to send the bolt carrier forward.
8. Close the ejection port cover and ensure the selector lever is on safe.