Manual

29
Failure to Fire
CAUSE CORRECTION
Defective ammunition/dead primer Inspect all ammunition prior to use and ensure
SAMI/NATO compliant
Broken/weaken hammer spring Replace spring
FOD (Foreign Object Detected) Disassemble and clean
in Pin Channel (Fire Control Group)
Worn Firing Pin Replace firing pin
Failure to Extract
CAUSE CORRECTION
Worn/Broken extractor/spring Replace extractor/spring
Corroded/Out of specification Inspect all ammunition prior to use and ensure
ammunition SAMI/NATO compliant
Worn or damaged piston return spring Replace piston operational rod spring
Torn case rim Defective ammunition or dirty chamber –
clean chamber and inspect ammunition
Failure to Eject
CAUSE CORRECTION
Worn ejector spring Replace spring (May require gunsmith/
Armorer)
Short stroke/Double feed Inspect all ammunition prior to use and
ensure SAMI/NATO compliant
Failure to Cock
CAUSE CORRECTION
Worn disconnector &/or spring Replace disconnector or spring
Worn hammer &/or spring Replace hammer &/or spring
Worn trigger &/or spring Replace trigger &/or spring
FOD (Foreign Object Detected) Disassemble and clean rifle
lodged in Fire Control Group