Manual

28
5.0 Trouble Shooting
NOTE: When shooting with a silencer or suppressor please note the following:
1. Follow Manufactures instructions for mounting/ dismounting suppressor and for
care and use
2. Use suppressor design with same caliper of weapon
3. Ensure suppressor is firmly attached prior to use
4. Rate of fire shall increase
5. Gas/debris will increase
6. Weapon shall require an increase in lubrication and cleaning
7. Depending on suppressor design a heavier buffer and spring may be required for
optimum performance.
Failure to Load
CAUSE CORRECTION
Bent/damage magazine feed lips or Inspect magazine and replace as necessary
Worn/Weak magazine feed spring
Worn out/under powered action spring Replace spring
Under powered ammunition Use SAMI or NATO Spec. Ammunition
(Cause- Short Stroke)
Leading of feed ramps from use of Disassemble and clean feed ramps and
Non-FMJ (Full Metal Jacket) ammunition use jacketed ammunition
Failure to Lock
CAUSE CORRECTION
Wrong ammunition for chamber Use proper SAMI/ NATO Spec. Ammunition
FOD (Foreign Object Detected) in Disassemble and clean rifle
chamber or barrel extension
Ammunition defective/damaged or Inspect all ammunition prior to use and ensure
out of specification SAMI/NATO compliant
Weak/worn action spring Replace spring